WALL MOUNT PET DOOR
Freedom Pet Pass
- Extremely weather tight thermal canvas coated flap is sand colored on the inside, dark brown on the exterior
- Does not frame the wall out
- Full length magnet down sides and across bottom of flap
- Very wind resistant
- Flap is opaque
- Tough 1/4" thick bronze locking cover
- Polycarbonate chew guard around bottom of flap
- Designed and Manufactured in the USA
This newest pet door for walls has a very interesting flap. The flap is a heavy canvas rather than the traditional vinyl. The bottom of the flap has a polycarbonate protector which will deter pets from chewing on the flap. This means that the flap is not see through, it is completely opaque. The flap also has a full length magnet down each side and across the bottom as well. It's strong magnets make it very resistant to wind. The manufacturer has a short video of this door in action being tested and standing up to a leaf blower! See it in action HERE. Due to the strong magnetic attraction of the flaps small or timid dogs may have trouble pushing this door open. In that case you might consider the Hale Pet Door or the Dogwalk as an alternative.
Unlike our other wall mounted pet doors, this one DOES NOT FRAME THE WALL! That means that you will only receive the outside frame with the flap and the locking cover. No tunnel and no interior trim are included. This allows for more options to finish off the pet door but requires more work than a self-framing unit. We had one customer get really fancy and tile the inside of the tunnel for a similar installation. It can also be as simple as framing out the wall with wood and painting the tunnel to match the interior wall.
The manufacturer has produced a short video of the door withstanding a leaf blower at point blank range!
And another video to describe how the patent pending flap seals work:
Click
here for info on measuing your pets.
Click
here for rough opening and frame dimensions.
Click on a size to start an order! |
