SLIDING GLASS PET DOOR
Ideal VIP Panel for Vinyl Sliding Doors
- Fits sliders with 1½ to 1¾ thick vinyl framing
- Dual pane tempered glass
- Dual pane Ultra-Flex flap
- Semi-permanent installation
- Uses your existing door lock
- Limited lifetime warranty
- Standard height adjustment 76 ¾ - 78 ½
- 4 different height adjustment ranges to fit just about every sliding glass door
This new offering from Ideal Pet Products is an industry
first, as this is the very first pet door panel made with vinyl framing.
Vinyl framing has the advantage that it doesn't conduct temperatures
as well as aluminum so it is more insulating. This Ideal pet door also has dual
pane glass, and a flap style that is similar to the Thermo Panel III.
It is a double walled flap, but this one is split into sections with
hinges in between the sections. The flap material is a rigid Lexan,
and it seals very well.
This door requires semi-permanent installation, and
is quite involved. The end result is a more finished appearance.
This door's 1 ½" thick frame will match your vinyl slider in appearance,
and the lock will integrate with your sliding glass door lock (another
industry first). Please review the installation instructions before
you purchase this door. If it looks like the installation is too difficult,
try a Thermo Panel III. The Thermo Panel III is also very well insulated
but it is a very simple spring loaded pet door which is much easier
to install.
Prices go up as the height of the door increases, see note in red below table at bottom of screen for details.
Click here
to view the installation instructions. (requires Adobe Acrobat)
This product is subject to a 15% restock fee if returned for any other reason than damage in shipping.
Click on a size below to start an order!
|
