SLIDING GLASS PET DOOR
Hale Pet DoorTM Standard Panel
- Double flap design
- Fuzzy weather strip seals flaps to frame
- Multiple magnets hold flap shut
- Tempered dual pane glass
- Adapter channel for better sealing
- Cut to fit design requires hacksaw
- GE Lexan® locking
cover
- Buit to fit the height of your door
- 1 inch rise is standard, 5 inch rise optional
- 11 different flap sizes for any pet
Patio installation of a dog door can allow your pet access
to the outdoors. The Hale is an extremely weather tight panel for
your patio door.
This Hale pet door has dual pane glass and dual flaps. That's not a 2 piece
flap, that is 2 completely separate flaps. There is a flap on the inside
of the frame, and another on the outside of the frame. The flaps seal
to the frame with multiple magnets are located on the sides and bottom
of the flaps on medium and larger sizes. This pet door also has a fuzzy
weather stripping between the flap and the frame. To address possible
leaks between the pet door and the sliding door this unit comes with
an adapter channel. The adapter channel fits onto the edge of your
sliding glass door. When you close the door, the adapter channel actually
covers over the edge of the panel, so that instead of butting up against
the pet door as the other panels on the market do, the slider actually
closes over the end of the Hale pet door.
This sliding glass pet door is a "semi-permanent" installation.
It is a bit more complicated than the other "temporary" sliding glass pet doors on the market.
The frame pieces need to be cut down with a hacksaw to fit the pet
door into the frame. The Hale pet door is then inserted into the sliding
door track and screwed into place. Once in place the adapter channel
has to be screwed to the edge of the sliding door.
If the idea of cutting the panel or drilling
holes in the sliding door or the frame doesn't appeal to you, consider
the Thermo
Panel III as an alternative.
5 year limited warranty.
Since this Hale pet door is custom built it takes approximately
3 weeks to receive your order (including shipping time). Custom orders
are not returnable or refundable.
The color sample on the
right will vary with your particular monitor, and the colors of the
pet doors vary slightly by manufacturer, but it is shown to give
an approximate idea of the colors available. Satin is actually a
brushed aluminum, similar to the bottom of a soda can.
Click on a size to start an order! You'll make your rise selection on the next screen.
|
