CHOOSE YOUR PET DOOR INSTALLATION TYPE:

SLIDING GLASS

WINDOW MOUNT

DOOR MOUNT

WALL MOUNT

SCREEN MOUNT

ELECTRONIC

FRENCH DOOR / CUSTOM

GLASS DOOR
FRENCH DOOR
CUSTOM WALL

REPLACEMENT FLAPS

KENNEL

MISCELLANEOUS:

KENNEL

SLIDER PARTS

PET DOOR HOODS

LOST?

SEE SITE MAP

NEED HELP DECIDING?

CALL CUSTOMER SERVICE TOLL FREE:
(866) 377-3667

FRENCH DOOR / CUSTOM PET DOOR
Hale Pet Door^TM Custom Size

• Very weather-tight pet door
• Double Flap pet doors have insulating dead air space
• Custom sized to your needs
• Can be easily installed in French doors or paneled doors
• Heavy duty extruded aluminum frame
• Color matched locking cover with deadbolt
• Available in Arizona Beige, White, Bronze, or Silver (Satin)
• Does NOT fit doors with single sheet of glass (see GLASS DOOR page for more info)

This custom pet door is exactly the same as the Hale Pet Door, but can be custom fit to your specific needs. Cost is figured by the size of the rough opening that you are filling. In the case of the French door pet door, the hole that is left by removing that piece of glass is the rough opening. The key here is that MUST have separate panes of glass in each little window. If you have one big sheet of glass with the gridwork laid over it, this pet door will not work. Once you have verified that they are separate panes, measure your potential rough opening. Suppose that pane of glass is 12" x 12". Multiply the width of the opening by the height of the opening to obtain the size of the opening in square inches. A 12" x 12" opening is 144 square inches. Then choose the size whose range includes your measurement, in this case a 137 to 170 inch.

The door in the top picture was made taller than the actual pane of glass. The wood framing was moved up, and a shorter piece of glass made to fit the new smaller area above the pet door for French door. In this way it is possible to get a taller pet through a French door. This is a complicated installation, but it shows just what is possible with a custom size dog door.

The one in the lower picture is the more typical installation where a pane is removed and the pet door made to fit the resulting hole. The pet door is in the picture is the bronze color.

Your actual flap dimension will be 2" inches narrower and 2" shorter than the pane of glass or the rough opening. So again using a 12" x 12" example, the flap size will be 10" x 10".

The color sample on the right will vary with your particular monitor, and the colors of the pet doors vary slightly by manufacturer, but it is shown to give an approximate idea of the colors available. Satin is actually a brushed aluminum, similar to the bottom of a soda can. The locking cover is made from a tough color matched UV resistant marine grade Starboard plastic that comes with a steel springloaded lock for maximum security.

THESE HALE CUSTOM DOORS DO NOT ADJUST IN SIZE! THE SIZE OF THE OPENING DETERMINES THE COST OF THE PET DOOR AND THE SIZE OF THE FINAL BUILT PRODUCT. PLEASE SPECIFY THE SIZE (NOTATING WIDTH AND HEIGHT) OF YOUR ROUGH OPENING ON THE ORDER SCREEN. WITHOUT THIS MEASUREMENT WE CANNOT COMPLETE YOUR ORDER!

All custom size doors are non-refundable, so call with any questions before ordering.

	Size Range	1 Flap	2 Flap	Shipping
	0 to 64 sq in	130.00	160.00	FREE *
	65 to 88 sq in	160.00	195.00	FREE *
	89 to 136 sq in	200.00	240.00	FREE *
	137 to 170 sq in	245.00	290.00	FREE *
	171 to 210 sq in	270.00	320.00	FREE *
	211 to 252 sq in	315.00	375.00	FREE *
	253 to 304 sq in	355.00	420.00	FREE *
	305 to 345 sq in	390.00	460.00	FREE *
	346 to 367 sq in	395.00	475.00	FREE *
	368 to 522 sq in	450.00	535.00	FREE *

* Free shipping to contiguous 48 states. Returns credited less shipping costs - click here for return policy details

Our Rating for Hale Custom Door- 4.5 Stars
Hale pet doors are very high quality with the option for very weather tight dual flaps. This door is made in the USA, and custom sized to fit your existing opening. What more could you ask for?